         |
   |
Remote RadEye HR X-ray sensor |
The Remote
RadEye HR detachable x-ray sensor is a very high-resolution,
miniature image sensor designed for compact, high-performance x-ray
imaging systems. The
sensor head is located at the end of a detachable cable that can
reach into tight corners. The camera electronics are mounted in a
separate enclosure which can be placed up to one meter away. While
designed for portable NDT applications, the Remote RadEye HR can
also be used in fixed installations. |
|
Feature |
- Detachable, rugged sensor module on 1 meter cable
- 27 by 36 mm active area
- 22 lp/mm (22.5 μm) resolution
- Energy range from 10 to 90 kV
- 12-bit digital video output
- Digital frame grabber or USB interface
- Ready-to-run software and drivers
|
|
Application |
- Bio & Medical Imaging
- Electronics Inspection
- Component Inspection
- Weld Inspection
- Computed Tomography
- Food & Agriculture
- Scientific Imaging
|
|
Specification |
|
Detector Specification |
Shad-o-Box |
Shad-o-Snap |
|
Ave. dark current (23℃) |
50 ADU/s |
50 ADU/s |
|
Read noise ( rms ) |
tbd ADU |
tbd ADU |
|
Dynamic Range |
4000 : 1 |
4000:1
|
|
Digitization |
12 bits |
12 bits |
|
Conversion Gain |
60 electr/ADU |
60 electr/ADU |
|
Sensor data rate
|
1500 kHz
|
1000 kHz
|
|
Min. frame period
|
1.32 sec
|
1.98 sec
|
|
General Specifications |
All Versions |
|
Operating Temperature |
0 ~ 50℃ |
|
Storage Temperature |
-25 ~ 85℃ |
|
Humidity (non-condensing) |
10 ~ 80 % |
|
